How to use Washing Soda in Laundry
Washing soda (sodium bicarbonate), which you already have in your refrigerator, can also be used to reduce odors in laundry, increase detergent and bleach performance, soften clothes and control detergent suds. Washing soda, along with distilled vinegar, is safe to use in standard and high-efficiency washers. It can also be used to reduce your dependency on harsh chemicals.
How to use washing soda in laundry
Chlorine bleach is often used to help remove odors and general grime in our laundry. In water that is too acidic or alkaline, bleach needs a boost to work more effectively. By boosting its cleaning properties, you may be able to use less bleach to achieve the same results, saving yourself money and reducing the bleach’s impact on the environment.
Adding 1/2 cup of washing soda for each 1/2 cup of bleach (being sure to add the bleach at the proper time) will help regulate the pH level in the water so bleach will work more effectively to reduce bacteria and loosen the soil.
If you’re not using chlorine bleach, that 1/2 cup of washing soda will boost the performance of your detergent. This is especially important if you have hard water or use a value detergent. The dry washing soda should be added to the empty washer tub before dirty laundry is added. Do not place washing soda in a washer’s automatic dispensers.
Benefit of Use Washing Soda for Laundry
Reduce and eliminate laundry odors
Bacteria is responsible for the unpleasant odors that can be found on linens and clothes. When detergent molecules break down the bacteria cells on fabrics, the bacteria is removed. To work effectively, detergents that are less expensive but don’t contain any enzymes to fight bacteria will need to be boosted.
Washing soda regulates the washer’s pH level by keeping it from becoming too acidic or too alkaline. Washing soda can be added to every laundry load to make detergents more effective and less bacteria-friendly.
Washing soda and water can be used as a pre-soak for heavy odor problems such as underarm sweat, or environmental odors such as cigarette smoke. Use warm water to dissolve 1 to 2 cups of washing soda. Add the washing soda to the warm water in a large basin or washer tub. Allow your stinky clothes to soak overnight before washing as usual.
If your garments need to be refreshed and are not machine washable, you can seal them in a container such as a storage tub or a box of washing soda. To remove odors, leave them on the rack for 24 hours.
Enhance Bleach and Detergent Performance
To remove odors and other grime from laundry, chlorine bleach is used often. Bleach needs to be able to work better in water that is too alkaline or acidic. You may be able use less bleach to achieve similar results by increasing its cleaning properties. This will save you money and reduce the impact of bleach on the environment.
Washing soda can be added to 1/2 cup bleach. This will regulate the pH of the water and help reduce bacteria.
Washing soda can be used to boost your detergent’s performance, even if you don’t use chlorine bleach. This is particularly important if your detergent is formulated for hard water. Before dirty laundry is washed, dry washing soda should be added into the empty washer tub. Washing soda should not be placed in the automatic dispensers of washers.
Best Selling Washing Soda Online 2022
Natural Softening of Fabrics
Washing soda regulates the washer’s rinse water pH by keeping it from becoming too acidic/alkaline. Washing soda can be added to every rinse cycle to balance out detergent and mineral deposits. It also helps to keep clothes from becoming stiffer by keeping them from re-accumulating on clothes.
Washing soda, a natural mineral that is also less harmful than synthetic fabrics softeners with fragrances that mask odors, is less harsh than synthetic fabric sanitizers . Washing soda is safe and can be used in place of synthetic fabric softeners, which can cause problems with children’s pajamas that have fire retardant finishes.
Irons that are clean
Washing soda can be used as a gentle abrasive. Mix a mixture of washing soda and water to remove starch and scorch from the cool iron’s faceplate. Use a clean cloth to rub the paste all over the iron’s face. To remove stubborn buildup, scrub the iron with a clean cloth. Use distilled white vinegar to clean the faceplate.
The iron will glide smoother, making ironing easier and leaving no traceable deposits.
Control washer suds
While it may look funny on television, suds from your washing machine can cause serious problems in your laundry room. Suds control has become a top priority with the new HE front-loading washers. You’ll notice suds if you use regular laundry detergent instead of HE detergent.
If this happens, shut off the washer and grab your washing soda box. To quickly dissolve the suds, sprinkle the powder on top. Washing soda will absorb some moisture and make cleanup easier.